Home
Where to Start
About DR6
News and Updates
Tutorials
Data Products
Data Access
Sky Coverage
Instruments
Data Flow
Algorithms
Glossary
Known Problems
Help and Feedback
Search

Glossary of SDSS Terminology

This page contains a comprehensive glossary of SDSS-related terminology. Terms are given in alphabetical order, with definitions and links to extended descriptions where available. If you come across a term you don't understand, or think we should include, please submit it to the SDSS helpdesk.

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z


A

adaptive moments

A method of measuring object shapes. These moments are close to optimal for measuring the shapes of faint galaxies, and have been used for weak lensing studies. See the Adaptive Moments section of the algorithms pages.

APO

Apache Point Observatory, located in Sunspot, New Mexico. This is the location of the 2.5m SDSS telescope as well as the Photometric Telescope (PT), as well as other non-SDSS telescopes. See APO homepage.

ARC

Astrophysical Research Consortium. Body that owns and operates APO.

asinh magnitude

Magnitudes within the SDSS are expressed as inverse hyperbolic sine (or ``asinh'') magnitudes, sometimes referred to informally as luptitudes . The transformation from linear flux measurements to asinh magnitudes is designed to be virtually identical to the standard astronomical magnitude at high signal-to-noise ratio, but to switch over to linear behavior at low S/N and even at negative values of flux, where the logarithm in the Pogson magnitude fails. Details can be found in the Photometry section of the Algorithms pages, or the actual Lupton et al. 1999 AJ paper.

asTrans file

FITS binary table with astrometric transformations for every field in a single imaging run. It transforms frame (row,col) coordinates to great circle (mu,nu) coordinates for a given inclination. Available in the DAS.

AstroDA

The data acquisition and analysis system used to collect data from the survey telescope cameras.

Astrom

The data processing pipeline that maps CCD pixel coordinates to celestial coordinates. The detailed workings of this pipeline are described in the Astrometry section of the algorithms pages, or the Pier et al. 2003 AJ paper.

astrometric chip

The SDSS camera contains 24 2048x400 pixel CCDs (in addition to the 30 2048x2048 photometric CCDs) which are used for astrometry and focus monitoring. Because they are smaller chips, the effective exposure time is only 11 seconds, allowing the survey to observe brighter stars without saturation. These bright star positions are necessary to match to objects present in astrometric catalogs used by the Astrom pipeline. For more details on these chips, please see the appropriate section of the camera pages or the AJ imaging camera paper (Gunn et al. 1998).

astrometry

The detailed methodology utilized by the SDSS is described in the Astrometry section of the algorithms pages.

Astrotools

The collaboration's software package to run data processing.

atlas image

For each detected object, the atlas image comprises the pixels that were detected as part of the object in any filter. These are available through the DAS, as a single file for each field.


B

Best

We maintain multiple versions of the SDSS imaging data set. The Best version contains the images and photometric catalogs with the highest quality data at the time of the data release. The target version contains those data at the time the target selection algorithm was run for that part of the sky. For example, the DR1 "best" data set contained better data for some parts of the sky than the DR1 "target" data set (including most of the EDR data set).

binned frame

Each file is a FITS image for one filter, 512 x 372 pixels, with WCS information. These are the corrected frames with detected objects removed and binned 4 pixels by 4 pixels. All pixels that are in atlas images are replaced by the background level before binning, with suitable noise added. All of the header parameters from the original image are inherited as well. Available in the DAS.

Black Book

This document provides a description of the original science goals of the survey, as well as the hardware and software designs, and was the 1996 proposal to NASA. Please keep in mind that it is not updated, so information within it may no longer be current. Nevertheless, it provides an excellent overview of the survey. The science content of this proposal is available online in the Project Book.

boresight

The telescope control computer keeps track of a specific point in the telescope focal plane that is called the boresight. The boresight is not fixed in the array but is at one of two places for the two strips that compose a stripe. It is the boresight that will track great circles. Technically, the boresight tracks a path that is a great circle in J2000 coordinates as viewed from the solar system barycenter.


C

calibration

The process by which the photometric and spectroscopic observations are calibrated. The goal of calibration is to take the digital camera readouts and convert them to measured quantities, like fluxes. The details of these procedures can be found on the algorithms pages.

camcol

A Camcol is the output of one camera column as part of a Run. Therefore, 1 Camcol = 1/6 of a Run. It is also a portion of a scanline.

camera

The instrument used for imaging. It consists of 30 photometric and 24 astrometric CCDs (see camera description). The camera is a mosaic of 54 CCD detectors in the focal plane, 30 large devices arranged in 6 columns of 5 each and 24 smaller devices around the periphery. See this sketch of the camera focal plane or this real life image. The camera is described in detail in the imaging camera paper (Gunn et al. 1998).

CAS (Catalog Archive Server)

The Catalog Archive Server contains the measured parameters from all objects in the imaging survey and the spectroscopic survey. It will become available as part of the next data release.

central meridian

The meridian which passes through the center of the survey area, 12h 20m , defines the central meridian of a scan. The great circle perpendicular to it passing through the survey center at =32.8deg is the survey equator.

child

A product of the deblending process. When two objects are near each other on the sky, their images may appear merged. The deblender tries to split this merged image; the resulting sub-images are called children. The initial merged image is called a parent. For more details, see the Deblending section of the algorithms pages.

chunk

A chunk is composed of a set of touching but non-overlapping primary segments (or parts of segments) which fills a "chunk" of a stave, and is therefore bounded on the east and west by lines of constant mu, and north-south by lines of constant eta (if in the North). Southern chunks have no eta boundary applied. A chunk may also have a lambda cut if it is at the end of the survey region for that stripe. Chunks do not overlap, so the union of all existing chunks represents the unique sky coverage for the survey at any given time. See this figure explaining the SDSS survey geometry for details. Note that the bounds on chunks, if using mu/eta, are a mix of survey coordinates and great circle coordinates. Note: The term chunk has sometimes been used to describe an area of sky that has had tiling run on it. This is properly called a tiled region.

classification

The method by which we assign a type (star or galaxy) to each object. The details of this procedure are described in the Classification section of the algorithms pages.

Cloud Camera

A camera at the mountain that takes continuous pictures of the sky at 10 microns, a wavelength at which clouds emit. It is a sensitive measure of the photometricity of the sky as a function of time.

CMM

Coordinate Measuring Machine, a device used to measure the positions of holes in the fiber mount plates for the spectrographic survey.

Cmodel magnitude

Composite model magnitude. See magnitude, cmodel.

coordinates

The SDSS uses three different coordinate systems. Of course, we use standard astronomical right ascension (RA) and declination (Dec), J2000. There is also the survey coordinate system, with coordinates lambda (λ) and eta (η). This is just a rotation of the usual RA, Dec system. Finally, there is the great circle coordinate system, which is actually a separate coordinate system for each stripe. The coordinates of this system are mu (μ) and nu (ν).

corrected frame

Each corrected frame is a FITS image for one filter, 2048 columns by 1489 rows, with row number increasing in the scan direction. These are the imaging frames with flat-field, bias, cosmic-ray, and pixel-defect corrections applied. A raw image contains 1361 rows, and a corrected frame has the first 128 rows of the following corrected frame appended to it. The pixels subtend 0".396 square on the sky. Header information using the world coordinate system (WCS) allows standard astronomical FITS tools to convert pixel position to right ascension and declination. Available in the DAS.

CVS

The Concurrent Versions System, used by SDSS software and website developers to maintain versioning control. An open source project available at https://www.cvshome.org/.

cx/cy/cz

The coordinates on the unit sphere utilized by the HTM code; these are stored in the database.


D

DAS

The Data Archive Server, which provides access to the imaging and spectroscopic products of the survey. The DAS is located at http://das.sdss.org/DR5-cgi-bin/DAS. We also provide descriptions of the DAS data access tools.

data model

The description of the structure and organization of the data in a database. The data model tells you all the tables names, their contents, and how they are related to, and linked with, one another. The actual implementation of a data model is called the database schema. For the flat files available in the DAS, the data models are available here.

deblend

Deblending is the process by which overlapping objects in images are separated. The frames pipeline attempts to determine whether each object actually consists of more than one object projected on the sky and, if so, to deblend such a parent object into its constituent children, self-consistently across the bands (thus, all children have measurements in all bands). For details on how this works, and what flags this procedure may set, see the Deblending section of the algorithms pages.

Dervish

An FNAL software toolkit used by many of the data acquisition and reduction systems.

deVaucouleurs

Also know as the r1/4 law, it describes the radial light profile of a typical elliptical galaxy. Defined as
I(r) = I0exp{-7.67[(r/re)1/4]}. An elliptical version of this profile is fit to every detected object, yielding the deV parameters. See the model magnitude section of the photometry algorithm page for details.

DR1

Data Release 1. The first major release of SDSS data to the public, occurring in March, 2003. A small portion of the data was released earlier as part of the Early Data Release (EDR).


E

EDR

Early Data Release. The first public release of SDSS data occurred in June of 2001. The current release includes the area present in the EDR, and more. The data has also been reprocessed with improved software. The EDR is described in the EDR paper on the AJ web site, also available as EDR paper in HTML.

ellipticity

Measures how elliptical an object is. In the SDSS, we have numerous methods to measure this:

eta

Latitude in the survey coordinate system. Eta is the angle between the survey equator and the great circle passing through the point perpendicular to the survey meridian, positive to the north. Constant latitude curves are great circles

exponential model

The radial light distribution of a disk galaxy can often be fit by an exponential profile:
I(r) = I0exp(-1.68r/re)
The number 1.68 is chosen so that the model radius is a half-light radius. An elliptical version of this profile is fit to every detected object, yielding the exp parameters. See the model magnitude section of the photometry algorithm page for details.


F

False color pipeline

A pipeline to produce 3-color JPG files of zoomed-down SDSS images.

fiber

The SDSS spectrograph uses optical fibers to direct the light from individual objects to the slithead. Each object is assigned a corresponding fiberID. The fibers are 3 arcsec in diameter in the source plane. Each fiber is surrounded by a large sheath which prevents any pair of fibers from being placed closer than 55 arcsec on the same plate.

fiberMag

The fiber magnitude. See Magnitude, fiber.

field

A field is a part of a camcol that is processed by the Photo pipeline at one time. Fields are 2048x1489 pixels; a field consists of the frames in the 5 filters for the same part of the sky. Fields overlap each other by 128 rows; primaries are decided when Chunks are resolved (using objects between rows 64 and1425 as primaries). A field at the edge of a Chunk may in fact be included in 2 (or more) Chunks. See this figure explaining SDSS field geometry for details.

filter

A piece of material used to allow only specific colors (or wavelengths) of light to pass through. The SDSS uses five filters: u,g,r,i,z. However, defining standards and absolute calibration for these filters has been difficult. Please read the Camera Page for details.

FITS

The Flexible Image Transport System, a standard method of storing astonomical data. The FITS format has a home page.

flag

A bitmask used in the database to specify various properties of an object. There are many flags in the SDSS catalogs which tell the user extremely important and useful pieces of information, such as whether the object was deblended or saturated, for instance. There are status flags set by PSP, and by survey operations, on a frame-by-frame basis, describing the quality of the PSF, and the quality of the data overall. Each object is given status flags that sort out overlaps. And the spectra have flags at two levels as well: pixel-by-pixel flags, and warning flags accompanying the redshifts and classification to indicate trouble. For more help with flags, see the Flags Help Page.

FNAL

Fermi National Accelerator Laboratory, one of the participating institutions in SDSS. Their homepage is http://www.fnal.gov.

footprint

The area on the sky covered by the SDSS. The footprint released for DR5 is described on the sky coverage page.

fpAtlas file

A FITS binary table containing the atlas images for all objects detected in all five filters in a single field. Requires special software to decode into individual FITS images for each object. The FITS images are available in the DAS.

fpBin file

See binned frame.

fpC file

See corrected frame.

fpFieldStat file

A binary FITS table containing a statistical summary of the results of the frames pipeline for one field for a single frames pipeline run. This information is also found in the Field table in the CAS database. Available in the DAS.

fpM file

See mask frame.

fpObjc file

These are FITS binary tables containing catalogs of detected objects output by the frames pipeline. These are uncalibrated, as opposed to the tsObj files, with no targeting information. Available in the DAS.

frame

The data stream from a single CCD in a scanline is cut into a series of frames which measure 2048 x 1489 pixels and overlap 10% with the adjacent frame. The frames in the 5 filters for the same part of the sky are called a field.

frames pipeline

In this pipeline, the images are bias-subtracted and flat-fielded, and bad columns, cosmic rays, and bleed trails are interpolated over. This yields corrected frames. Then objects are found by running a PSF-matched filter over the image, and matched up between the five frames making up a field. A deblender is run to resolve overlaps, and the properties of each object are written to the fpObjc files. Atlas images are written to the fpAtlas files.

fundamental standard

The photometry of the primary standard stars is ultimately tied to the SED of the star BD 17 +4708, which is the fundamental standard for the SDSS photometric system. See the Smith et al. 2002 AJ paper for more details.


G

GNATS

The system used to report and track bugs and issues with SDSS hardware and software; for collaboration use only.

great circle coordinates

One of the two main coordinate systems utilized by the SDSS. In this system, mu and nu are spherical coordinates (corresponding to ra and dec) in a system whose equator is along the center of the stripe in question. The stripes of the survey are great circles which all cross at (RA, Dec) = (95, 0). The stripes are defined by their inclination with respect to the equator, and are indexed by integers n such that the inclination of a stripe is -25 + 2.5n. Thus, stripe n=10 corresponds to the Equator. The design is that the area covered by the imaging on a given stripe (the so-called OK_SCANLINE area in the north) is a 2.5 degree wide rectangle centered on nu=0 in Great Circle coordinates.


H

The Hammer

The Hammer is the name of a piece of code developed by the University of Washington Red Star analysis team to provide accurate spectral types and other information for red stars (generally redder than spectral type K, extending through types M, L and T). The spectral type classifier output of the Hammer is provided in the sppParams table of the DR6 CAS for each star in the database. The Hammer provides the best classification information for redder stars.

HTM

The Hierarchical Triangular Mesh (HTM) is a partitioning scheme to divide the surface of the unit sphere into spherical triangles. It is a hierarchical scheme and the subdivisions have not exactly, but roughly equal areas. HTM is used to index the coordinates in the object databases for faster querying speeds. For more details, and downloadable software, see the HTM Website.

HoggPT

A program which runs on the mountain, which uses information from the photometric telescope and the cloud camera to determine the photometricity of a given night. It was written by David Hogg and colleagues, thus its name.

hole

A field or set of fields which is missing from the data, either because of non-photometric conditions, tracking problems, very poor seeing, or simply because that area has not been surveyed yet. This is encoded in the status flags.


I

IOP

Imaging Observers Program. The software that runs the imaging camera on the survey telescope.


J

JHU

Johns Hopkins University, one of the participating institutions in SDSS. The SDSS JHU homepage is http://www.sdss.jhu.edu.

JPG

Japan Participation Group, one of the participating institutions in SDSS. Their homepage is http://indus.astron.s.u-tokyo.ac.jp/works/SDSS/sdss.html.

K


L

lambda

One of the coordinates of the survey coordinate system. The stripe longitude lambda is measured from the survey central meridian positive to the east along the great circles perpendicular to that meridian. Constant longitude curves are circles centered on the survey poles .

LEGACY

One of the three major surveys that comprise the second phase (SDSS-II) of the Sloan Digital Sky Survey (SDSS). It will complete the SDSS survey of the extragalactic universe, obtaining images and distances of nearly a million galaxies and quasars over a continuous swath of sky in the Northern Hemisphere.

luptitude

An informal name for the asinh magnitude.


M

maggie

A maggie is a linear measure of flux; one maggie has an AB magnitude of 0 (thus a surface brightness of 20 mag/square arcsec corresponds to 10-8 maggies per square arcsec). This unit is used for object radial profiles, where we provide the azimuthally averaged object surface brightness in a series of annuli.

magnitude, cmodel

Composite model magnitude. The magnitude obtained from the best-fitting linear combination of the best-fitting de Vaucouleurs and exponential model for an object's light profile (cf. magnitude, model). See cmodel magnitude description in Photometry section of the Algorithms pages.

magnitude, fiber

The flux contained within the aperture of a spectroscopic fiber (3" in diameter) is calculated in each band and stored in fiberMag. Details can be found in the Photometry section of the Algorithms pages.

magnitude, model

Just as the PSF magnitudes are optimal measures of the fluxes of stars, the optimal measure of the flux of a galaxy would use a matched galaxy model. With this in mind, the code fits two models to the two-dimensional image of each object in each band:
1. a pure deVaucouleurs profile, and
2. a pure exponential profile.
The best-fit model in the r-band is fit to the other four bands; the results are stored as the model magnitudes. Details, including a very important warning, can be found in the Photometry section of the Algorithms pages.

magnitude, Petrosian

Stored as petroMag. For galaxy photometry, measuring flux is more difficult than for stars, because galaxies do not all have the same radial surface brightness profile, and have no sharp edges. In order to avoid biases, we wish to measure a constant fraction of the total light, independent of the position and distance of the object. To satisfy these requirements, the SDSS has adopted a modified form of the Petrosian (1976) system, measuring galaxy fluxes within a circular aperture whose radius is defined by the shape of the azimuthally averaged light profile. Details can be found in the Photometry section of the Algorithms pages and the Strauss et al. 2002 AJ paper on galaxy target selection.

magnitude, Pogson

The Pogson magnitude is the standard astronomical magnitude system, where one increment in magnitude is an increase in brightness by the fifth root of 100. A star of 1st magnitude is therefore 100 times as bright as a star of 6th magnitude. That is, for two objects
M1 - M2 = -2.5log(F1/F2)
where M1 and M2 are the magnitudes of two objects, and F1 and F2 are their luminous fluxes.

magnitude, PSF

Stored as psfMag. For isolated stars, which are well-described by the point spread function (PSF), the optimal measure of the total flux is determined by fitting a PSF model to the object. Details can be found in the Photometry section of the Algorithms pages.

mask

mask frame

Each file is a binary FITS table for one filter. Each row of the table describes a set of pixels in the corrected frame, using mask values described in Table 8. Available in the DAS.

MAST

The Multimission Archive at Space Telescope. Data from a variety of space missions and ground-based telescopes is provided, including the Sloan EDR. The site is located here.

modelMag

The model magnitude. See magnitude, model.

Monitor Telescope (MT)

The previous incarnation of the Photometric Telescope (PT).

MT field

See secondary patch.

mtpipe

The pipeline for processing data from the Photometric Telescope. A description can be found in the appropriate section of the EDR paper.

mu

One of the coordinates in the SDSS great circle coordinate system. Mu corresponds to RA, or longitude.


N

nfCalib

The pipeline that uses the results of MTPipe and astrom to apply the photometric and astrometric calibration to each object in the imaging data.

nu

One of the coordinates in the SDSS great circle coordinate system. Nu corresponds to Dec, or latitude.


O

object

Enumerates photometric objects within a given field. Thus, multiple fields may have objects with the same object number.

Objectivity

A brand of object-oriented database used to initially serve the EDR and to run OpDB.

ObjID

The long object identification, which is a bit-encoded integer of run, rerun, camcol, field, object. When the data is reprocessed (rerun), this number will change! IMPORTANT NOTE: For spectroscopic objects, there are two possible choices for the matching photometric measurement: TargetObjID is the photometric object identification number of the corresponding photometric object when targeting was run, and BestObjID, which points to the best imaging and processing of the photometry.

OpDB

The survey's internal Operations Database at FNAL.


P

par file

Also known as a Yanny parameter file. This is a simple ascii file format developed to store lists of parameters for the SDSS, such as the survey coverage description.

parent

A product of the deblending process. When two objects are near each other on the sky, their images may appear merged. The deblender tries to split this merged image; the initial merged image is called a parent, while the resulting sub-images are called children. For more details, see the Deblending section of the algorithms pages.

participating institution

One of the institutions involved in the survey. These institutions have contributed hardware, software, manpower, or financial support to the survey, and thus have pre-public access to data.

petroMag

The Petrosian magnitude. See Magnitude, Petrosian

Photometric Pipeline (Photo)

A series of linked pipelines (Serial Stamp Collecting pipeline, SSC; Postage Stamp Pipeline, PSP, and Frames) which analyze the raw image data, including bias subtraction, sky and PSF determination, flat-fielding, and finding and measuring the properties of objects. The astrometric and photometric calibration is carried out with the astrometric pipeline, and nfCalib.

Photometric Telescope

Also abbreviated PT. An 0.5-meter telescope used for monitoring subtle changes in the atmosphere during the course of the survey. Its principal function is to aid astronomers in accurately calibrating an object's brightness, as measured with the main telescope. See the PT web page for more details.

plate

SDSS has the largest multi-fiber spectrograph in operation in the world, observing 640 objects simultaneously. This is done by drilling holes in round aluminum plates at the positions of objects of interest, and plugging optical fibers into each hole. For a better idea, see this picture.

plate mapper

An instrument that maps which plugged fiber corresponds to which target object. The 640 fibers of the spectrograph are placed by hand without regard as to which fiber corresponds to which position. An automated fiber mapper resolves this object-to-fiber match-up by scanning lasers across the terminal ends of the fibers and observing where they ``light up'' on the focal plane.

Point Spread Function (PSF)

The detailed shape of the response of the telescope plus instrument to a star. It varies with position, filter, and time, due to changes in the atmosphere and the optics of the telescope. It is calculated by the PSP.

Postage Stamp pipeline (PSP)

This pipeline determines for a run the background sky, the flat-field, and the spatially varying Point Spread Function (PSF) in each chip, all of which will be used by the Frames pipeline.

Primary

The ``main'' observation of an object. Because there are overlaps at many levels of the imaging (runs, stripes), an object may be observed two or more times. Whether or not a specific observation of an object is the primary is decided when chunks are resolved. Whether an object is primary or not depends on a large number of factors.

primary standard

One of the 158 stars on the SDSS photometric system that is observed by the PT to measure the extinction of a given night, and which is used to calibrate the magnitudes of the secondary standards (qv). The primary standard system is described in the Smith et al. 2002 AJ paper.

profile

An azimuthally-averaged radial surface brightness profile. In the catalogs, it is given as the average surface brightness in a series of annuli. This quantity is in units of maggies per square arcsec. The number of annuli for which there is a measurable signal is listed as nprof, the mean surface brightness is listed as profMean, and the error is listed as profErr. This error includes both photon noise, and the small-scale ``bumpiness'' in the counts as a function of azimuthal angle. When converting the profMean values to a local surface brightness, it is not the best approach to assign the mean surface brightness to some radius within the annulus and then linearly interpolate between radial bins. Do not use smoothing splines, as they will not go through the points in the cumulative profile and thus (obviously) will not conserve flux. What frames pipeline does, e.g., in determining the Petrosian ratio, is to fit a taut spline to the cumulative profile and then differentiate that spline fit, after transforming both the radii and cumulative profiles with asinh functions. We recommend doing the same here.
The annuli used are provided in this table.

psField file

A FITS binary table with preliminary photometric calibration, as well as final point-spread-function fit, for a single field in an imaging run. Available in the DAS.

psfMag

The PSF magnitude. See Magnitude, PSF


Q

Quality Assurance (QA)

Generally speaking, the process by which data are confirmed to be of survey quality. Each pipeline carries out QA, whose results are available for examination. After the imaging data are calibrated, they are run through a comprehensive set of tests (runQA) that confirm that the various photometric measures are consistent, and that, e.g., the Zhed point is well-behaved. Overlap QA looks for consistency in the photometry and astrometry of objects in overlaps between adjacent scanlines and stripes.

QA hole


R

Reconstructed Frame

Images of SDSS fields constructed by "pasting" atlas image cutouts into the field and filling the rest of the image with simulated sky noise.

reddening

Reddening corrections in magnitudes at the position of each object, reddening, are computed following Schlegel, Finkbeiner & Davis (1998). These corrections are not applied to the magnitudes in the databases. Conversions from E(B-V) to total extinction Alambda, assuming a z=0 elliptical galaxy spectral energy distribution, are tabulated in Table 22 of the EDR Paper.

rerun

A reprocessing of an imaging run. The underlying imaging data is the same, just the software version and calibration may have changed.

resolve

A term describing the assignments of subsets of data (fields, segments, runs) to fill a chunk. A chunk is "resolved" when there is sufficient data to fill a contiguous length of a stripe. At that time, decisions are made on the best data to use (seeing, photometric conditions) to fill the desired area. A chunk can be resolved multiple times, as new data is acquired or data is reprocessed. This is why we now have multiple snapshots of the data in the database (see Target and Best)

Run

A Run is just a length of a strip observed in a single contiguous observing pass scan, bounded by lines of mu and nu. A strip covers a great circle region from pole to pole; this cannot be observed in one pass. The fraction of a strip observed at one time (limited by observing conditions) is a Run. Runs can (and usually do) overlap at the ends. Like strips, it takes a pair of runs to fill in a length of a stripe. This is why you may read about data taken from "Runs 752/756" or some similar terminology. However, each individual run does contain 6 camcols spanning the same range of nu, but not delimited by eta. These run pairs might not have the same starting and ending nu coordinates. See this figure for details.


S

scanline

A subdivision of a strip. Each strip is covered by 6 "scanlines". Scanlines are defined in great circle coordinates. The great circle coordinate system is different for each strip, and is defined by setting the equator of the coordinate system to be the center line of constant eta for the stripe to which the strip belongs. A scanline is then bounded on the top and bottom by lines of constant nu, with no east or west boundaries. Scanlines touch but don't overlap, and thus are a unique mapping on the sky for that stripe only. Scanlines for different stripes DO overlap. This is because the scanlines come from the camera columns, or camcols, which have a fixed physical width, while the spherical coordinates converge at the poles. See this figure for details. Note: At times, the term scanline has been used interchangeably (and improperly) with camcol.

schema

The implementation of a data model in a database.

science archive

Also known as the SX, this was the prior incarnation of the database containing the object catalogs for the SDSS (for the EDR).

SDSS

The Sloan Digital Sky Survey. The survey will map in detail one-quarter of the entire sky, determining the positions and absolute brightnesses of more than 100 million celestial objects. It will also measure the distances to more than a million galaxies and quasars. For more, visit our homepage at http://www.sdss.org.

SDSS-II

The second phase of the SDSS has three components:
  1. LEGACY
  2. SEGUE
  3. SuperNovae

sdssQA

The SDSS Query Analyzer. A Java-based Graphical User Interface (GUI) that provides the functionality necessary for SDSS users to prepare and submit queries to the SQL server database.

sdssQT

Obsolete. This was the SDSS Query Tool, used for the Early Data Release. It is a Graphical User Interface (GUI) that provides the functionality necessary for SDSS users to prepare and submit queries to the Science Archive, the 'end product' of the SDSS, where all publicly available scientific data products are stored and ready for access.

secondary patch

The PT observes a series of secondary patches on a given night, calibrated to the system of primary standards. These patches overlap the 2.5m survey stripes; with the photometry determined for these, we can set the zeropoints of the 2.5m runs.

segment

A segment is a piece of a given frames pipeline reduction (run/rerun/camcol), covering a piece of a scanline, bounded on the east and west by lines of constant mu. Because segments are defined before the primary area of a stripe, segments can actually go beyond the eta limits of a stave (and a chunk). Indeed, near the very end of a stripe (near the poles), a segment may fall completely outside a stave. See this figure for details.

SEGUE

The Sloan Extension for Galactic Understanding and Exploration is mining the stellar content of the Milky Way in order to create a detailed 3-dimensional map of the Galaxy. SEGUE will ultimately obtain spectra of 240,000 stars in the disk and spheroid, revealing the age, composition and phase space distribution of stars within the various Galactic components. These stellar excavations will provide essential clues for understanding the structure, formation and evolution of our Galaxy.

SEGUE is one of the three major surveys that comprise the second phase (SDSS-II) of the Sloan Digital Sky Survey (SDSS).

Serial Stamp Collecting Pipeline (SSC)

The first stage of the Photometric pipeline. It collects for further analysis the atlas images of stars to be used in astrometric calibration and PSF determination.

SkyServer

The public outreach website for distribution of SDSS data. Includes tools to get images, spectra, and catalog info, as well as educational and fun materials.

sky version

The SkyVersion is a numerical designator of whether photometric data is Target (SkyVersion=0), Best (SkyVersion=1), or one of the repeated scans of the Southern Survey (SkyVersions 2 through 14).

small circle

A section of a sphere which does not contain a diameter of the sphere. Lines of constant latitude are small circles.

SN

One of the three major surveys that comprise the second phase (SDSS-II) of the Sloan Digital Sky Survey (SDSS). The Sloan Digital Sky Survey. It includes an intensive study of supernovae, sweeping the sky to find these remnants of gigantic explosions from dying stars. Astronomers can precisely measure the distances of distant supernovae, using them to map the rate of expansion of the universe. This study will help to verify and quantify one of the most important discoveries of modern science the existence of the cosmological dark energy.

Son-of-Spectro

A pared-down version of spec2d that runs on the mountain, and gives feedback to the observers about the S/N of each spectroscopic exposure and any possible problems in the data.

SOP (spectroscopic observing program)

This is the program which operates the spectrographs, including guiding the telescope and controlling the calibrations.

Southern Survey

In the Southern Galactic Cap region, the SDSS will not observe the entire available area. Instead, selected stripes will be observed repeatedly for variability studies and to coadd for deeper images.

Spec1D

The second half of the spectroscopic pipeline, also known as Spectro 1D, which classifies the spectra and performs various scientific analyses on them, including obtaining the redshifts. The operational goals of the 1D SPECTRO pipeline are:
  1. To fit the continuum of the spectrum.
  2. To determine an emission-line redshift and classify all detected emission lines. A flag will also be set to identify any expected emission lines (on the basis of the spectral classification) which were not seen.
  3. To classify the spectrum by cross-correlating with a set of template spectra ranging from stars to quasars. A principal component analysis similar to that of Connolly et al. (1995) has also been implemented - see galaxy spectral classification details.
  4. To cross-correlate the spectrum with the a set of templates and obtain redshifts (a href="../algorithms/redshift_type.html">Details here).
  5. To fit a set of emission/absorption lines as a Gaussian (a href="../algorithms/speclinefits.html">Details here).
  6. To measure the velocity dispersion of galaxies (a href="../algorithms/veldisp.html">Details here).
  7. To measure various absorption line indices, as outlined in the EDR AJ paper.

Spec2D

The first half of the spectroscopic pipeline (also sometimes referred to as idlspec2d), which reduces the raw 2D spectral frames to 1D calibrated spectra. The operational goals of the 2D SPECTRO pipeline are:
  1. To interpolate over bad pixels
  2. To mask all bad pixels and pixels contaminated by strong sky emission.
  3. To bias and dark subtract the raw 2D data frames
  4. To trim the frame
  5. To flat-field using calibration frames taken at the same telescope pointing position before and after an exposure on the sky.
  6. To optimally extract 1D spectra from this 2D frame.
  7. To apply wavelength calibration, rebin to a common wavelength solution, and sky subtract.
  8. To coadd the three or more individual exposures for each object.
  9. To put the red and blue halves of the spectrum together.
  10. To flux calibrate the spectrum to obtain spectrophotometry good to roughly 15%, using the measured photometry of spectrophotometric standards on each plate.

SpecBS

An alternative 1-d spectroscopic pipeline developed by David Schlegel. The data and documentation for this pipeline are available at http://spectro.princeton.edu/.

SpecObjID

A unique bit-encoded 64-bit ID used for spectroscopic objects. It is generated from plateid, mjd, and fiberid. Completely independent of any photometric enumeration system.

Spectro

The spectroscopic data reduction pipeline. See Spec2D and Spec1D for details.

spectrograph

The instrument used to obtain spectra of objects. SDSS actually uses two identical spectrographs, each receiving as input 320 of the fibers from a plate. Details of the spectrograph can be found on the spectrograph page.

spectrophotometry

The procedure for absolute flux calibration of spectra. Please see the Spectrophotometry section of the algorithms pages for an extensive description.

spPlate file

A FITS image containing the wavelength- and flux-calibrated combined spectrum over all exposures (potentially spanning multiple nights) for a given mapped plate. Output as part of spec2d, it does not contain redshift information. Available in the DAS.

spSpec file

A FITS image containing the line measurements and redshift determinations, as well as the 1-d spectrum, for a single object, summing over all of its exposures through a given mapped plate. Available in the DAS.

SQL

The Structured Query Language, a standard means of asking for data from databases. For more, see our SQL help page.

SSPP

The SEGUE Stellar Parameters Pipeline, is the union of a set of techniques gathered together in one set of pipeline, for measuring common stellar atmospheric parameters (namely metalicity, effective temperature and surface gravity) for stars based on medium resolution (R ~ 2000) spectra of the stars, combined with accurate stellar photometry. This pipeline is used to provided Teff, [Fe/H] ([M/H]), and log g measurements for all stars of sufficient S/N (generally than 10 or 15 for bluer stars) in the DR6 sample. The results are available in the CAS as part of the sppParams table in DR6.

stave

A unique region of sky, bounded by two lines of constant eta. A stave is a portion of a stripe that is tapered near the poles so that it does not overlap with the neighboring stave. This term is used analogously to the meaning of stave in barrelmaking.

Stokes Parameters

These quantities are related to object ellipticities. Define the flux-weighted second moments of the object as:
Mxx = <x/r2> ,Myy = <y2/r2> , Mxy = <xy/r2>
In the case that the object's isophotes are self-similar ellipses, one can show that:
Q = Mxx-Myy = [(a-b)/(a+b)]×cos2
U = Mxy = [(a-b)/(a+b)]×sin2

where a and b are the semimajor and semiminor axes and is the position angle. Q and U are Q and U in the table PhotoObj and are referred to as "Stokes parameters." They can be used to reconstruct the axis ratio and position angle, measured relative to row and column of the CCDs. This is equivalent to the normal definition of position angle (east of north), for the scans on the equator. The performance of the Stokes parameters are not ideal at low signal-to-noise ratio, in which case the adaptive moments will be more useful.

strip

A strip is a scan along a line of constant survey latitude eta. The center of a stripe is set at a given eta; centers of strips have a boresight offset added. Because the columns of CCDs have gaps between them, it is necessary to take two offset but overlapping observations to fill in a stripe. These two scans are called strips. Note that while strips are centered on a given eta, THEY ARE NOT BOUND BY ETA LINES. Thus they are rectangular regions and can overlap at the poles. See this figure for details.

stripe

Stripes are the sum of two strips, defined in survey coordinates (lambda, eta). A "stripe" is defined by a line of constant eta, bounded on the north and south by the edges of the two strips that make up the stripe, and bounded on the east and west by lines of constant lambda. Because both strips and stripes are defined in "observed" space, they are rectangular areas which overlap as one approaches the poles. See this figure for details. NOTE: You may see the term stripe used to mean an area bounded by eta lines, which would be a unique part of the sky. That is a common use of the term, as some of the target selection documentation uses it that way. The proper (and relatively new) term for the unique, eta-bound portion of a stripe is a stave.

surface brightness

The frames pipeline also reports the radii containing 50% and 90% of the Petrosian flux for each band, petroR50 and petroR90 respectively. The usual characterization of surface-brightness in the target selection pipeline of the SDSS is the mean surface brightness within petroR50.
It turns out that the ratio of petroR50 to petroR90, the so-called ``inverse concentration index'', is correlated with morphology (Shimasaku et al. 2001, Strateva et al. 2001). Galaxies with a de Vaucouleurs profile have an inverse concentration index of around 0.3; exponential galaxies have an inverse concentration index of around 0.43. Thus, this parameter can be used as a simple morphological classifier.
An important caveat when using these quantities is that they are not corrected for seeing. This causes the surface brightness to be underestimated, and the inverse concentration index to be overestimated, for objects of size comparable to the PSF. The amplitudes of these effects, however, are not yet well characterized.

survey coordinates

One of the two main coordinate systems used by the survey, with coordinates eta and lambda. This is simply another spherical coordinate system, where (eta,lambda)=(0,90.) corresponds to (ra,dec)=(275.,0.) and (eta,lambda)=(57.5,0.) corresponds to (ra,dec)=(0.,90.). Note also that at (eta, lambda)=(0.,0.), (ra,dec)=(185.,32.5). So, this is a pure rotation of the usual RA/Dec system, as opposed to the great circle system, which is defined relative to each individual stripe. For some reason, although "eta" is constant along great circles, it is referred to as "survey latitude," while "lambda" is referred to as "survey longitude." Also, "eta" runs only from -90. to 90.; the back of the sphere is covered by "lambda", which runs from -180. to 180. The Survey coordinates are defined such that the "primary" area of a stripe (otherwise known as a stave) in the north is defined by a rectangle in Survey coordinates which is 2.5 degrees wide in eta (coordinate width).

survey equator

The great circle perpendicular to the central meridian, passing through the survey center at delta=32.8deg is the survey equator.

survey poles

The locations of the poles in the survey coordinate system. Due to the unusual nature of this system, there is an east pole and a west one, at delta = 0 , alpha = 18h 20m and 6h 20m.

SX

An abbreviation for the old Science Archive. This was the prior incarnation of the database containing the object catalogs. utilizing Objectivity software.


T

Table

A specific set of objects and their measured quantities stored in a database.

Target

1. An object select as a candidate for spectroscopy.
2. The pipeline used to select candidate for spectroscopy. The procedures and various type of targets are described in the the Target algorithm page.
3.The version of the data set containing photometric measurements for objects at the time Target was run. If newer observations or improved calibration or software becomes available, the imaging data may be reprocessed, but not re-Targeted. The improved photometry is provided in the separate Best data set.

TDI

The SDSS imaging data are taken in time-delay-and-integrate (TDI) mode at the sidereal rate almost simultaneously in five bands. The sky tracks through 5 CCD detectors in succession, each located behind a different filter. See this image to get a better idea.

tilable target

These are spectroscopic targets which are assigned to tiles by tiling. The significance of this is that tilable targets are supposed to have as close to uniform completeness as possible and it should be possible to define well-defined samples of such targets. The bitmasks primTarget and secTarget described in the description of the target selection contain the target assignments of each object. Tilable targets for the survey proper are those with the primTarget flags QSO_HIZ, QSO_CAP, QSO_SKIRT, QSO_FIRST_CAP, QSO_FIRST_SKIRT, GALAXY_RED, GALAXY, GALAXY_BIG, GALAXY_BRIGHT_CORE, or STAR_BROWN_DWARF, and those with the secTarget flag HOT_STD.

tile

A 1.49 deg radius circle on the sky determined by tiling and which contains the locations of up to 592 tilable targets and other science targets. For each tile one or more plates will be created. If less than the maximum of 592 tilable targets can be assigned to that tile, the spare fibers are assigned to other spectroscopic targets. The 48 remaining fibers will be assigned to calibration targets.

tile region

An area of sky, usually (but not necessarily) contiguous, on which tiling has been run. Sometimes also called a chunk, although that is incorrect usage of the term.

tiling

The process of designing tiles for spectroscopy.

TPM

Telescope Performance Monitor. Software that reports on the physical parameters of the survey telescope.

tsField

The tsField files are FITS binary tables containing the information about each imaging field that is exported to the Field tables in the CAS. Available in the DAS, in both Best and target versions.

tsObj

The tsObj files are FITS binary tables containing calibrated object catalogs output by the frames pipeline, one per field. They are available from the DAS, in both Best and target versions, and form the basis for the photometric data found in the PhotoObj table in CAS.

tsObjFromMap

A tsObj file containing the calibrated information only for those objects which have been targeted. Available in the DAS.

U

Ubercal

Ubercal is a method of recalibrating the SDSS Imaging survey, using a 'global' rather than a 'local' (scan-by-scan), technique of solving for zeropoints and extinction for each camera-column for each run. It makes heavy use of overlapping 'crossing scans', which run at an oblique angle to the standard survey stripes and yield multiple detections of the same stars in different camera columns. Preliminary application of the Ubercal techniques suggests that the overall scatter in the photometry of the survey can be reduced from about 2% rms in the gri bands down to 1% rms, a very significant improvement. The Ubercal outputs are available for the whole of the Main survey imaging footprint in the DR6 CAS. They are available as both offsets from the standard SDSS photometry and as stand alone magnitudes for each primary object.

V

View

In a database, a way of looking at a subset of the data in a given Table. Views are treated just like Tables in SQL queries. For example, in the CAS, the Galaxy view shows only the subset of PhotoObj table that are classified as galaxies.

W

WCS

World Coordinate System. The FITS standard for defining astrometric calibrations in the image header.

X

Y

Z

zhed point

The stellar locus in SDSS color-color space is essentially one-dimensional. Various canonical positions in color-color space can be defined from bends in the stellar locus; we call these positions the Zhed Points. The constancy of these positions is a very useful test of the uniformity of our photometry.




Last modified: Wed Jun 27 17:45:42 CEST 2007