The Optical Spectroscopy Pipeline

Introduction and Resources

The SDSS Early Data Release (EDR) paper is the original resource for understanding the processing and data products from the SDSS, describing the pipelines and spectroscopic data products. Successive data release papers: DR1, DR2, DR3, DR4, DR5, DR6, DR7DR8, DR9, DR10,DR11, DR12, DR13, DR14, DR15, and DR16 describe changes to the optical spectroscopic data reduction between data releases. The technical summary paper provides more general information on the SDSS-I survey, the SDSS-III summary paper provides general information on SDSS-III and similar for the SDSS-IV summary paper . The BOSS overview paper provides general information for BOSS, the eBOSS overview paper also describes SEQUELS and the eBOSS program. The algorithms page includes links to pages describing algorithms used by the spectroscopic data-reduction pipelines. This page provides a summary of those steps and the associated output files.

Most of the optical spectroscopic catalog data (but not the spectra themselves) have been loaded into the Catalog Archive Server (CAS) database. Depending on the scientific use case, users may be better off obtaining SDSS data through a carefully constructed CAS query rather than by downloading the data files from the SAS. Simple queries can be used to select just the objects and parameters of interest, while more complex queries can be used to do complex calculations on many objects, thereby avoiding the need to download the data.

The remainder of this page gives a short description of pipeline changes for DR16 motivated by eBOSS. We provide a brief overview of spectroscopic data processing and sections that describe the steps of data processing in detail. In addition to the descriptions, each section provides references to papers that give additional details and a table of the files associated with that step of the pipeline that can be found in the SAS. These tables include links to the file format documentation (the "data model") and templates which can be used to generate SAS URLs for those files. The templates are in "C printf" format, and can be used in C, bash, Python, and many other languages to automatically generate URLs.

Changes for DR17

  • In April 2020, some calibration files have been updated (pixel biases, pixel flats and bad pixel masks). This update affects all eBOSS spectra taken after summer 2017. Therefore all spectra after MJD 58000 are different from their equivalent DR16 version.
  • A bug in the SPECOBJID field in the spAll has been found in DR16 and it is now fixed in DR17.
  • Missing metadata in the header of the individual spectrum files (spec files) is now fixed.

The pipeline version for DR17 is v5_13_2, and can be found in the SDSS svn repository here.

Even though eBOSS is a different survey than BOSS, it uses the same instrument and has similar data to BOSS. Starting with DR13, all SDSS data releases contain both BOSS and eBOSS spectra reprocessed using the latest version of the reduction pipeline. The reprocessing consists of raw CCD count extraction, sky subtraction, flux calibration, wavelength solution, PSF estimates, and the spectral classification (galaxy, quasar or star). We did not, however, reprocess the SDSS-I/-II data.

Overview

Spectroscopic Observing
The spectrographs mounted on the primary 2.5m telescope collected spectra from each plate. There are two spectrographs, each of which collects data from 320 (SDSS) or 500 (BOSS/eBOSS) fibers. Each spectrograph has a dichroic that sends light to red and blue cameras, so the instrument produces a total of four images for each exposure.
Spectroscopic Data Reduction
The first component of the spectroscopic pipeline extracts one dimensional spectra from the raw exposures produced by the spectrographs, calibrates them in wavelength and flux, and combines the red and blue halves of the spectra. The second component measures features in these spectra, redshifts from these features, and classifies the objects as galaxies, stars, or quasars.

Notes

  • In the tables below listing the data URLs, prepend 'https://data.sdss.org/sas/dr17/' to all 'URL format' values to get the full URL.
  • URL suffixes are listed for the eBOSS survey, which includes a reprocessing of BOSS data from SDSS-III. Replace "eboss/" with "sdss/" to get the equivalent location for the original SDSS-I/-II survey files.
  • Data reduction can occur multiple times for both images and spectra. The output of each unique reduction is labeled with a distinct "rerun" number (for photometry) or different "run2d" and "run1d" versions (for spectroscopy).
  • The BOSS+eBOSS spectroscopic data for DR16 are processed with idlspec2d code
    version run2d=run1d=v5_13_0.
  • The legacy target selection and boss target selection algorithm pages describe how the various spectroscopic target classes are selected for the BOSS and legacy SDSS surveys.
  • The tiling algorithms page describes the process by which the spectroscopic plates are designed and placed relative to each other.

Spectroscopic Observing

Plate Plugging (plug)

When the observatory is ready to observe a plate, the observatory staff plugs optical fibers into the holes drilled into the plates, and maps which fiber corresponds to which hole (and therefore which object) by shining light through each fiber. This data is incorporated into one of the HDUs of the spPlate file described below.

Raw Data Collection

Observers mount cartridges containing the drilled, plugged plates on the telescope, and collect a series of 15-minute exposures on each plate until it reached a threshold estimated signal to noise ratio and at least three exposures had been collected.

SAS files generated in spectroscopic data collection
File Type in/out Description URL format format parameters
sdReport out records exposures collected on a night Not public
sdR out raw spectroscopic data frames eboss/spectro/data/%d/sdR-%c%d-%08d.fit.gz mjd, CCD (r or b), camera (1 or 2), exposure id

Spectroscopic Data Reduction

The idlspec2d software has two major pipeline steps:

spec2d
Extract and calibrate 1-dimensional spectra from 2-dimensional raw CCD data
spec1d
Measure object classifications and redshift from those 1D spectra.

Two-dimensional Pipeline (spec2d)

References: Stoughton et al. (2002), section 4.10.1

The spec2d pipeline reads science and calibration exposures from the spectrographs, reduces and calibrates the science exposures, extracts the one dimensional spectra from the two dimensional exposures, stacks multiple exposures into combined spectra, and produces corresponding masks and noise estimates.

SAS files used or generated by the spec2d pipeline
File Type in/out Description URL format format parameters
spPlan2d in the spectro2d processing plan eboss/spectro/redux/%d/%04d/spPlan2d-%04d-%d.par run2d, plate, plate, mjd
spPlancomb in the processing plan for combining spectra eboss/spectro/redux/%d/%04d/spPlancomb-%04d-%d.par run2d, plate, plate, mjd
plPlugMapM in records which fiber corresponds to which hole in a plate (and therefore objects, and what coordinates on the sky) plPlugMapM not public, but table is in HDU 5 of the spPlate files
sdReport in records exposures collected on a night Not released
sdR in raw spectroscopic data frames eboss/spectro/data/%d/sdR-%c%d-%08d.fit.gz mjd, CCD (r or b), camera (1 or 2), exposure id
spCFrame out calibrated spectra for a single CCD and exposure eboss/spectro/redux/%d/%04d/spCFrame-%c%d-%08d.par run2d, plate, CCD (r or b), camera, exposure id
spPlate out the 640 (SDSS) or 1000 (BOSS) combined flux- and wavelength-calibrated spectra over all exposures (potentially spanning multiple nights) for a given mapped plate eboss/spectro/redux/%s/%04d/spPlate-%04d-%d.fits run2d, plate, plate, mjd

Example: the spPlate file for plate 4444 MJD 55538 in DR17 is at URL
https://data.sdss.org/sas/dr17/eboss/spectro/redux/v5_13_2/4444/spPlate-4444-55538.fits
[107 MB].

BOSS/eBOSS has two spectrographs with 500 fi bers each, grouped in 25 bundles of 20 fibers each. The light is split into a blue channel and a red channel, for a total of 4 CCD images per exposure. The CCD y-coordinate is the spectral dispersion direction (larger y is larger λ) and larger x is larger fiber number, though the spectral "traces" in y vs. x are curved and do not exactly align with CCD columns.

Raw electrons are extracted from the CCD images using row-by-row extractions similar to Horne 1986 by fitting Gaussians, plus a polynomial background, to each CCD row for each bundle of 20 fi bers.

Fiber flats correct for fi ber-to- fiber variations by comparing the differences between fibers equally illuminated by a smooth flat lamp spectrum.

Sky model is derived from flat-fi elded electrons of sky fi bers and then interpolated to the locations of every science fi ber and subtracted. Flux calibration vectors model the instrument and atmospheric throughput per exposure by comparing standard star spectra to a set of models of known flux.

Flux correction vectors adjust for flux mis-calibrations with low-order polynomials per-fi ber per-exposure to make different exposures of the same object consistent with each other.

Flux distortion vectors model variations in the throughput across the focal plane.

Putting these together, the "flat-fielded sky-subtracted electrons" in spFrame:

$F_{e} = electrons / \big(superflat \cdot fiberflat\big) - skymodel$

become the "calibrated flux" in spCFrame:

$F = \big(F_{e}/calib\big) \cdot fluxcorr \cdot fluxdistort$

The following sections describe each of these steps in more detail.

Flux correction

Individual exposures are initially flux-calibrated with no constraint that the same object has the same flux across different exposures. Empirical "fluxcorr" vectors are broadband corrections to bring the different exposures into alignment for each object prior to coaddition. In DR13 and prior, these were implemented for each spectrum by minimizing

$\chi_{i}^{2} = \sum_{\lambda}\frac{\big(f_{i\lambda}-f_{ref,\lambda}/a_{i\lambda}\big)^{2}}{\big(\sigma^{2}_{i\lambda}-\sigma^{2}_{ref,\lambda}/a^{2}_{i\lambda}\big)^{2}}$

where f is the flux of exposure i at wavelength λ; fref,λ is the flux of the selected reference exposure; and a are low-order Legendre polynomials. The number of polynomial terms is dynamic, up to a maximum of 5 terms. Higher order terms are added only if they improve the χ2 by 5 compared to one less term. This approach is biased toward small a, since that inflates the denominator to reduce the χ2.

Since DR14, we solve the fluxcorr vectors relative to a common weighted coadd Fλ which is treated as noiseless compared to the individual exposures.

$\chi_{i}^{2} = \sum_{\lambda}{\frac{\big(f_{i\lambda}-F_{\lambda}/a_{i\lambda}\big)^{2}}{\sigma^{2}_{i\lambda}}}$

We additionally include an empirically-tuned prior that a ~ 1 to avoid large excursions in the solution for very low signal-to-noise data.

The fluxcorr terms are Chebyshev polynomials instead of Legendre polynomials. We actually solve for ((f - Fa)/σ)2 and then return 1/a. The prior is weighted by the data weights such that the relative strength of the prior vs. the data is approximately independent of S/N.

Flux distortion

The flux distortion vectors are parameterized in terms of magnitude (i.e. log-flux) that are achromatic with x, y, x2, y2, xy, where those are linear coordinates XFOCAL, YFOCAL from the plugmap.

There are also chromatic terms that scale as $\widetilde{\lambda} = 1- \big(5070/\lambda\big)^{2}$, since that function gives an equal effect between 3900 and 5070 Å as between 5070 and 9000 Å. There are also magnitude offsets as a function of spectrograph ID, and a chromatic offset as a function of spectrograph ID. The 13 parameters are:

$F_{new} = F_{orig}(1+a_{0}s_{1}+a_{1}s_{2})exp(\\ \ \ \ \ \ a_{2}x + a_{3}y + a_{4}xy +a_{5}x^{2} + a_{6}y^{2} + \\ \ \ \ \ \ a_{7}\widetilde{\lambda}x + a_{8}\widetilde{\lambda}y + \\ \ \ \ \ \ a_{9}\widetilde{\lambda}s_{1} + a_{10}\widetilde{\lambda}s_{2} + a_{11}\widetilde{\lambda}^{2}s_{1} + a_{12}\widetilde{\lambda}^{2}s_{2})\\),$

where s1 = 1 if specid = 1 else 0 and s2 = 2 if specid = 1 else 0.

Only SPECTROPHOTO_STD or REDDEN_STD objects are used to compute the flux distortion. The procedure minimizes differences between spectro-flux and photometry (CALIBFLUX). Only g, r and i-bands are used.

One-dimensional Pipeline (spec1d)

Reference: Bolton et al. (2012)

The spec1d pipeline reads spectra and determines classifications, redshifts, and other spectroscopic parameters. It produces the following files.

SAS files generated by the spec1d pipeline
File Type in/out Description URL format format parameters
spZline out emission line fits eboss/spectro/redux/%d/%04d/spZline-%04d-%d.fits run2d, plate, plate, mjd
spZall out all spectroscopic classifications and redshifts eboss/spectro/redux/%d/%04d/spZall-%04d-%d.fits run2d, plate, plate, mjd
spZbest out spectroscopic classifications and redshifts eboss/spectro/redux/%d/%04d/spZbest-%04d-%d.fits run2d, plate, plate, mjd

Per-object Spectrum Files

As of DR9, the pipeline also provides a reformatting of the same spectral data into one file per PLATE-MJD-FIBER, including the coadded spectra from spPlate, the emission line fits from spZline, the redshifts and classifications from spZall and spZbest, and optionally the individual exposure spectra from spCFrame. These are useful when you need all of the information for a small subset of objects.

File Type in/out Description URL format format parameters
spec out All spectral information for a single PLATE-MJD-FIBER eboss/spectro/redux/%d/spectra/full/%04d/spec-%04d-%05d-%04d.fits run2d, plate, plate, mjd, fiber
speclite out All spectral information for a single PLATE-MJD-FIBER except the individual exposures eboss/spectro/redux/%d/spectra/lite/%04d/spec-%04d-%05d-%04d.fits run2d, plate, plate, mjd, fiber

Stellar Parameters Pipeline (sspp)

References: Lee et al. (2008a), Lee et al. (2008b), Allende Prieto et al. (2008)

The SEGUE stellar parameters pipeline produces a number of files, stored together:

SAS files used or generated by the SSPP pipeline
File Type in/out Description URL format format parameters
ssppOut out SSPP stellar parameters ([Fe/H], log g, etc.) sdss/sspp/%d/%04d/output/param/ssppOut-%04d-%5d.fit rerun, plate, plate, mjd
ssppOut_lineindex out SSPP line indices sdss/sspp/%d/%04d/output/param/ssppOut-%04d-%5d.lineindex.fit rerun, plate, plate, mjd

Galaxy Parameter Pipelines

For spectra of galaxies, several additional analysis pipelines are applied to derive catalogs of physical galaxy parameters. These pipelines and their outputs are described fully in the Galaxy Parameter Pipeline pages.